If you plan to go for a picnic or have a friend staying overnight, you must have been looking for a portable, coziest, and most comfortable mattress. The air mattresses are specially designed for these kinds of purposes. You can utilize it for indoor/outdoor for various purposes.
The real problem comes when you need to inflate these mattresses without the knowledge or prior experience with how to blow them. But you don’t need to worry about this; we are here to help you in this and guide you through all the steps you need to take to the air mattress.
You can find out many methods and so much information to blow an air mattress. You might, for instance, utilize a vacuum, hair dryer, air compressor, or air pump. For instance, you can use an air compressor, air pump, hair dryer, and vacuum. We teach you how to fill the air in a mattress with an air compressor. Simply take the following actions:
6 Steps To Blow Up Air Mattress Using Air Compressor
Step 1: Look for the Manual
Whenever you buy an air mattress, you get a manual that tells you all the properties and how to inflate the air bed. All the maintenance requires time and how to deflate the mattress after use.
If you couldn’t find any manual copy in the package, then we are here to help you in this situation. Let’s begin the process.
Step 2: Find the Valve
In this step, you need to find out the air valve to fill the air. Some beds have two valves to inflate the air into the mattress and deflate the air from the mattress. However, some mattresses have only one valve to fill and remove the air from the bed.
To find that valve, you really want to set out the mattress on a level surface. Once you do that, you need to check whether there are any little holes. These holes can screw up our entire process because they leak all the air we are going to fill in. Assuming you find any openings, apply duct tape to seal them.
Our subsequent stage is to track down the valve. It will be more visible and have a plastic shield around it. If there are two, check which is for the inlet and which one is for an outlet; signs are marked on these for your help.
Step 3: Attach the Compressor
This step is much easier, as you have already found the valve to fill the air. Now, we have to attach the air compressor nozzle to the valve. To begin, uncover the seal and attach the nozzle to valve.
If the air compressor nozzle fits perfectly with the valve inlet, then you are good to go. But if it doesn’t fit completely, it may cause problems for us. To overcome this problem, you can use duct tape and cover all sides to stop air leakage.
Step 4: By using an Electric Air compressor
Two types of air compressors are available in the market, electric and manual. If you are using the modem electrical air compressor, it will inflate your bed very fast compared to the old manual one, but it’s also a little bit complicated to use. You can also use the portable compressor for this purpose.
The air compressor hose is already attached to the mattress valve. Now plug it in the power outlet at home and then press the start button on the compressor.
Now hold the compressor adapter firmly, which is attached to the valve, so that all air goes into the bed and no leakage can happen. Once you are sure that the bed is filled nicely and comfortable enough to sleep, you can turn off the switch and close the valve carefully so that no air can escape.
Step 5: By using a Manual Air compressor
There may be times when you don’t have the electrical air coming into the house, and you have to rely on the manual. Although the manual one is easy to use, it will take more time to inflate your air mattress.
Manual compressors have two types: leg and hand air compressors. You have to push the handles to inflate the mattress. Steady and steady air is now filling the mattress. Filling the air by this method can take more time.
Fill the air until the bed is not thick enough to have some rest on it. Congratulation, you have done it. Now with some practice, you can master this. Don’t forget to close the air mattress’s valve inlet to prevent any escaping of air.
Step 6: Safety measures
Whenever you assemble something, you must take some precautions for your safety. Similarly, in this process, you have to ensure that nothing goes wrong.
- Don’t overfill the air mattress. It can explode due to enormous pressure.
- Ensure the surface is clean before lying on the bed.
- Always check that bed is not damaged and not causing any leakage. You can cover it with duct tape.
Air mattress becomes essential whenever you plan to go on a picnic. Its benefits do not end here. You can even use it as an indoor bed if you are feeling comfortable on that.
Inflating an air mattress can become tedious work for you, and there are multiple ways to do it. If you have an air compressor at home, it should be your go-to option to do this job. This method will take much less time if you compare it with other methods. I highly suggest you use the air compressor to inflate the air mattress.